Description.
SMT General Consumable and Tools
ACRYLICS CONFORMAL COATING 1R28
HumiSeal® 1R28 Aerosol is an acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. The aerosol can is fitted with an elliptical spray pattern, which provides good control of spray with a well-defined coating edge.
HumiSeal® 1R28 Aerosol has the following advantages:
- Convenient application by aerosol with no need for dilution
- Contains no CFCs or ODPs
- Good protection against moisture and dirt
- Fluoresces under UV for ease of inspection and is easily repaired.
- Good flexibility
- Good adhesion to a variety of materials
Application of HumiSeal® 1R28
- Allow 48 hours minimum to reach room temperature before using cans stored or received during cold weather.
- Mask areas not requiring coating from overspray using suitable non-silicone masking methods or materials.
- Shake can vigorously before using and repeat frequently during use.
- Best results are obtained by spraying from a distance of 30 – 40cm in light even coats.
- Rotate the circuit by 90o between each coat
- Recommend 4 coats minimum
- A film thickness of 25 – 75 microns is sufficient to provide protection.
- To clean nozzle after use, hold can upside down, then press nozzle for a few seconds.
- When applied in conditions of high ambient humidity, blushing (cloudy white film) may appear. Heating the coated assembly in an oven for 1/2 hour at 76°C eliminates this condition.
Specification
Wave Soldering Output Conveyor
Wave soldering output connected machine apply to THT plug-in line and wave soldering connected machine combine together for output, which the features including the speed can be adjustable, low noise and easy to operate.
Feature
- Step-less speed regulation
- Axial flow fan
- Connector
- PVC conveyor belt, anti-static, wear resistance
Soldering Pot
Feature
- Using the military grade titanium pot, anti-corrosion, high temperature resistance, and longer service life.
- Apply to soldering small size
- Adjusting the temperature from 200-450°
- Passed SGS testing.
- Operating simply, energy saving.
Technical Specification
Kapton Dots
Product Description:
Introduction
Masking Dots are made of high temperature polyimide film. which are used in masking of circuit boards during wave soldering or other electronic manufacturing processes. It also can be used in powder coating, automotive and transformer manufacturing.
Polyimide masking discs have high dielectric strength. Polyimide masking discs offers excellent performance in electrical and thermal insulation.
Polyimide masking discs have 1.2~1.5 mil of silicon adhesive which does not leave any residue. It can withstand temperature up to 280℃.
High Temperature Masking Discs are made of polyimide film with 1.5 mil of Silicone adhesive which does not leave any residue. They can withstand temperatures of up to 500°F/(260°C). These masking discs have high dielectric strength and offer excellent performance in electrical and thermal insulation.
Applications:
- Masking of circuit boards during wave soldering or other electronic manufacturing processes
- Powder coating
- Automotive and transformer manufacturing
Adhesive Tapes
Kapton Tapes are made from Kapton HN film with Silicone adhesive. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments. Kapton polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications. Kapton Tapes have a high dielectric strength. Silicon adhesive protection leaves no residue.
Tape KD 852 is a polyimide film-backed silicone adhesive tape with high temperature resistant.
Application:
- Mask for printed circuit boards during wave solder or solder dip process.
- Automotive sensor and manifolds
- Insulating circuit boards
- Etching
- Fiber Optics Cable
- High temperature powder coating
- Semiconductor manufacturing
- Wave soldering during circuit board assembly
Storage Details
Store under normal conditions of 10° to 30°C and 40 to 70% R.H. in their initial packaging.
Shelf life is 6 months from the date of manufacture.
AI Splice Products
Product Details:
AI plug-in machine for a tailor-made set of convenient picking method Such as the shaft of the resistance of materials and components of the radiation of the electrical materials
1, the use of foreign high-strength, high viscosity tape:
2, positive and negative after precision die-cutting processing:
3, the use of the fingers will not touch the plastic surface to ensure that the reliability of the material.
A comprehensive splicing solution for AI component, such as for axial component, radial component and so on
AI Splice Products
Product Details:
AI plug-in machine for a tailor-made set of convenient picking method Such as the shaft of the resistance of materials and components of the radiation of the electrical materials
1, the use of foreign high-strength, high viscosity tape:
2, positive and negative after precision die-cutting processing:
3, the use of the fingers will not touch the plastic surface to ensure that the reliability of the material.
A comprehensive splicing solution for AI component, such as for axial component, radial component and so on
Splicing Cart Or Trolley TLTC01
The SMT Splicing Cart is ideal for splicing SMT component tape on-the-fly to dramatically reduce downtime on pick-and-place equipment. The cart rolls up to the feeder bank for easy splicing of reels and features storage space for spliced strips. Additionally, the cart offers storage for three splicing tools. To be used in conjunction with our Stapler type Splice Tool.
Features:
- Convenient
- Ergonomically designed
- Easy to use
- Durable steel construction
- Excellent durability of the steel body
- Increased productivity through automation
